-Applicable for many kinds of gases, such as CO2, argon, etc.
-Reduces and controls the pressure of gases for Welding work.
-Adopts piston decompression method, gas of high pressure enters into the regulator and then low pressure released.
-Could expediently see numerical values of the SCFH of carbon dioxide or argon from the transparent tube.
-The outlet fit either the female 9/16" x 18 nut or the male 5/8" x 18 fitting.
-You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting.
-The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.
-If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.
1x Pressure Reducer
CO2 Output Flow:10-60 SCFH
Argon Output Flow:10-70 SCFH
Max Pressure Range:4500 PSI, 30000KPA
Size:Approx. 12.5x7.4x16cm (4.9''x2.9''x6.3'')
MPN:[AUTO FILL EAN]