InstallationInstall units so the airflow is in the direction ''IN-OUT'' as indicated by arrow on the head of the unit. Install filter first in line of additional units such as regulators or lubricators, and as close as possible to the pneumatic tools or appliances being serviced. Unit must be installed in parallel from floor, downstream position for proper function. Do not install polycarbonate bowl in pressure that exceeds 150 PSI or where there is a presence of solvents harmful to polycarbonate. In these cases, use a metal bowl.The Unit can dis-assemble or assemble using a Phillips-head screwdriver or Allen wrench. An insert feature allows simple installation and removal in any location without disturbing the existing piping arrangement. The regulator can be mounted in either up or down position. This unique design allows unlimited adaptation to air preparation systems. Unit will permit use of standard size pipe nipples.Operation & AdjustmentsFiltering out of dirt and foreign particles, and the separation of
Max. Supply Pressure: 250 PSI, Max Operating Pressure: 150 PSI
10 Micron Element Stanard/ 3/8" NPT
Manual Drain & Metal Bowl /Includes 0-150 PSI Pressure Gauge & Bracket
Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off.
Manufacturerd In Korea