Lerway 110V All-Purpose Temperature Controller+ Sensor 2 Relay Output Thermostat Stc-1000

Price: $15.97
Product prices and availability are accurate as of 2017-11-15 04:08:05 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Specification and Size:
1.Front panel size75(L)×34.5(W)mm;
2.Mounting size:71(L)×29(W)mm;
3.Product size75(L)×34.5(W)×85(D)mm;
4.sensor length2minclude the probe.

Technical Parameters:
1. Temperature measuring range: -50~99oC;
2. Resolution: 0.1°C; 3. Accuracy: ±1°C (-50~70°C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC±10%, 50/60Hz;
6. Power consumption: ?3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60°C;
10.Storage temperature: -30~75°C;
11.Relative humidity: 20%~85% (No condensate).

Package Content:
1 x STC-1000 Temperature controller 110v
1 x 2M Sensor

Note to check whether the sensor is connected well. Please be sure to connect the heating relay.

FAQ:
1, Does not read temperature at all?
A: 1. Check whether the sensor is connected well. 2. Check your wiring diagram. Most of customers don't wire it right and think the unit is bad. The right wired diagram is displayed in pictures.

2. Cooling relay not activating ?
A: Cooling has the delay function. We set the default value as 3 minutes. When the heating turns off, the cooling will be on after 3 minutes. If the customers want it turns on immediately, you can set it as 0.

Product Features

Temperature calibration; Refrigerating control output delay protection Auto switch between refrigerating and heating?Retrun difference value Control temperature by setting the temperature setting value and the difference value Alarm when temperature exceeds temperature limit or when sensor error. Note to check whether the sensor is connected well. Please be sure to connect the heating relay.

Write a Review